Konica Minolta bizhub 161f - Manual (Page 76)

3.9 Loading Originals 3
bizhub 161f 3-33
B
e
for
e
M
a
k
in
g
Cop
ies
or
F
a
x
ing
Chap
ter
3
Placing the Original on the Original Glass
The method for positioning the original differs depending on the type of original
being used.
Precautions for Placing the Original on the Original Glass
Care should be taken when positioning the following types of originals.
An original of a non-standard size:
G The document size cannot be detected automatically. Press the [Paper] key or
the [Zoom] key, and then select the desired paper size (p. 4-4) or zoom ratio
(p. 4-10).
A highly transparent original (OHP transparencies, translucent paper, etc.):
G Place a blank sheet of paper of the same size over the original (p. 3-35).
A book or other three-dimensional object:
G Let the machine scan the contents of the original with the Automatic Document
Feeder raised. Do not attempt to push the Original Glass with excessive force,
as a malfunction could result. (The maximum load resistance of the Original
Glass is 4-1/2 lb.)
✎
Note
While scanning with the Automatic Document Feeder open, do not look directly
at the bright light that may shine through the Original Glass. Although the light
that shines through the Original Glass is bright, it is not a laser beam and,
therefore, is not as dangerous.