Konica Minolta bizhub 161f - Manual (Page 251)

8 8.7 When the Message “PAPER SIZE ERROR” Appears
8-22 bizhub 161f
W
hen
a M
e
s
s
a
ge A
p
p
ear
s
Ch
apte
r 8
8.7 When the Message “PAPER SIZE ERROR” Appears
If the paper size specified for a paper tray differs from the size of the paper loaded
in the tray, the message shown below appears when paper is fed from that tray.
Check the message for the paper tray and the paper size to be fed, and then load
paper according to the corresponding procedure described below.
For Tray1
1 Select “TRAY1 PAPER”.
❍ “Selecting the “PAPER SOURCE SETUP” menu” on page 7-15
2
Press the [1] key of the 10-Key
Pad, and then specify the correct
paper type and size.
❍ “Specifying the Setting for
“TRAY1 PAPER”” on
page 7-16
HL HL LG