Konica Minolta bizhub 161f - Manual (Page 194)

7.7 Setting Up the Fax Registration 7
bizhub 161f 7-47
Us
in
g th
e Uti
lit
y
Mod
e
Chap
ter
7
❍ “To fax using mailbox transmission” on page 6-12
❍ “To fax using relay initiation transmission” on page 6-14
❍ “To receive a fax using polling reception” on page 6-23
The settings are registered.
6
To specify other program dialing settings, repeat steps 3 through 5.
7 Press the [No/C] key to finish
programming.
The “FAX REGISTRATION” menu
appears again.
To change/delete a programmed broadcast transmission
1 Select the “FAX REGISTRATION”.
❍ Refer to “Selecting the “FAX REGISTRATION” menu” on page 7-34 .
2 Press the [4] key from the 10-Key
Pad to select “PROGRAM DIAL”.
3
Press the one-touch dial key ([12]
through [15]) programmed with the
broadcast transmission that you
wish to change or delete.
4 Press the [No/C] key.
5 Using the [ ] and [ Ö ] keys, select
either “EDIT” or “DELETE”, and
then press the [Yes] key.
❍ If “EDIT” was selected, the
specified recipients are
displayed in order. (Continue with step 6.)
❍ If “DELETE” was selected, the program dialing settings are deleted and the
“SELECT REGIST.KEY” appears again.
Ц