Konica Minolta bizhub 161f - Manual (Page 110)

5.1 Dialing 5
bizhub 161f 5-7
Fa
x
in
g
Cha
p
ter 5
To fax using program dialing
If one-touch dial keys have already been programmed with fax numbers and a
transmission/reception function (such as timer transmission or polling reception),
that function can be carried out by pressing just the corresponding one-touch dial
key.
For details on setting program dialing, refer to “Specifying the Setting for
“PROGRAM DIAL”” on page 7-46 .
1 Press the [Fax] key to enter Fax mode.
2 Load the document into the Automatic Document Feeder. (This step is not
necessary with polling reception.)
3
If necessary, change the “Resolution” setting (p. 5-11). (This step is not
necessary with polling reception.)
4 Press the one-touch dial key ([12]
through [15]) programmed with the
desired function.
5 Press the [Start] key.
The programmed function
automatically begins.
✎
Tip
To cancel a timer transmission, select “CANCEL RESERV.” from the
“FUNCTION” menu (p. 6-19).