Specifying the setting for “default tx, Specifying the setting for “default tx” -61 – Konica Minolta bizhub 161f User Manual
Page 208
7.8 Setting Up the Transmission
7
bizhub 161f
7-61
Us
in
g th
e Uti
lit
y
Mod
e
Chap
ter
7
3
Using the [ ] and [
Ö
] keys, select
the desired resolution setting, and
then press the [Yes] key.
❍
The resolution settings appear
as follows.
STD: Standard
FINE: Fine
S/F: Super Fine
H/T: Half Tone
If “H/T” was selected, a screen appears, allowing you to make a detailed setting.
(Continue with step 4.)
If any setting other than “H/T” was selected, the “TX OPERATION” menu
appears again.
4
Using the [ ] and [
Ö
] keys, select
the desired halftone setting, and
then press the [Yes] key.
❍
The halftone settings appear
as follows.
STD: Standard
FINE: Fine
S/F: Super Fine
The “TX OPERATION” menu appears again.
Specifying the Setting for “DEFAULT TX”
1
Select the “TX OPERATION”.
❍
Refer to
“Selecting the “TX OPERATION” menu” on page 7-59
2
Press the [3] key from the 10-Key
Pad to select “DEFAULT TX”.
3
Using the [ ] and [
Ö
] keys, select
either “MEM.TX” or “ADF TX”, and
then press the [Yes] key.
The “TX OPERATION” menu
appears again.
Ц
Ц
Ц