Bacharach PCA 2 24-9448 - Manual (Page 47)

Instruction 24-9448 4-13
Operation
4.12.2 Setting the Logging Interval and Duration
The loggng nterval s the length of tme between measurements, whle
the loggng duraton s the tme allocated to the loggng process. Set the
loggng nterval and duraton as follows:
TIP: If the duration is set for more than 10 hours, we recom-
mend using the optional AC power adapter to power the
analyzer.
1. As soon as loggng s turned ON as descrbed
n Secton 4.12.1, the LOGGING INTERVAL
screen appears.
2. Use the buttons to hghlght the desred
nterval, and then press ENT to make the
selecton and dsplay the LOGGING DURA-
TION screen. In ths example, 1 mnute has
been selected
3. Use the buttons to hghlght the desred
duraton, and then press ENT to make the
selecton and dsplay the LOGGING SUM-
MARY screen. In ths example, 2 hours has
been selected.
NOTE: If the selected duration requires more
memory than is currently available, then the
analyzer will automatically select the longest
duration possible for the selected interval.
LOGGING INTERVAL
1 sec
5 sec
10 sec
15 sec
30 sec
1 min
2 min
(more)
MENU
F1 F2 F3
LOGGING DURATION
5 min
10 min
15 min
30 min
1 hr
2 hr
5 hr
(more)
MENU
F1 F2 F3