2N Fixed line replacement with 2N SmartGate - Manual v1.1.2 - Manual (Page 17)

Before You Start 2.2
17
2.2 Before You Start
Product Completeness Check
Check the product for completeness before installation please:
 1× 2N
® SmartGate
 1× Antenna for direct connection 1)
 1× Magnetic Antenna with coax cable 1)
 1× Supply adapter
 2× Telephone Cable
 1× PC-connection serial cable
 1× SMS sending input connector
 2× Dowel
 2× Screw
 1× CD-ROM with User Manual and software 2)
 1× Quick Installation Guide + mounting pattern
Note
 1) The delivery includes an antenna to be connected directly to the
2N® SmartGate SMA connector. An antenna with a cable should be used
when GSM signal is poor or in case of interference with other devices
 2) Enclosed software:
2N® SmartGate PCManager
2N® SmartGate SMSgateway for easy SMS sending and receiving
2N® SmartGate Driver for PC
User Manual in format PDF
Lists of AT Commands for SIEMENS GSM modules used
Installation requirements
 2N® SmartGate is designed for vertical mounting on suspension holes (use the
mounting pattern). This position is the best for signal reception because a
vertical antenna is used. 2N® SmartGate can be operated in the horizontal
position too where the GSM signal is good.
 Install 2N® SmartGate with respect to the GSM signal strength – check the signal
strength using the PCManager.
 Place 2N® SmartGate out of range of sensitive devices and human bodies for
electromagnetic interference reasons.
 For the allowed range of operating temperatures refer to the “Technical
Parameters”.