2N Fixed line replacement with 2N SmartGate - Manual v1.1.2 - Manual (Page 26)

2N® SmartGate parameters configuration 3.1
26
the table for setting parameters will open. If you point at a parameter with the
mouse, the help text is displayed.
7. When the setting is finished, save data into the gateway. If the gateway is not
in its special programming mode, you are invited to set this mode again
according point 5.
8. You can use service Monitor to view parameters of connection and some more
information. The gateway must be connected to GSM network
Language
selection
Data
handling -
disc Data
handling -
gateway
Monitoring
Figure 3.1
Basic screen
of PC Manager
Setup
Connect/
Disconnect
Upgrade
Default
Main
menu