2N Fixed line replacement with 2N SmartGate - Manual v1.1.2 - Manual (Page 53)

Table of Parameters 3.2
53
Telephone number for service SMS Function No.:714
Telephone number for service SMS. The number is common for GGMC SMS and
"LOW CREDIT" SMS on prepaid SIM cards.
Setting options: 0-16 characters (0-9,*,#,+)
Default setting: blank
Initialization
All programmable parameters are arranged in tables according to their functions.
You can initialize either all parameters at once or one table of parameters.
Telephone line initialization FXS Function No.: -
Initialization of all parameters necessary for the telephone line FXS.
Telephone line initialization FXO Function No.: -
Initialization of all parameters necessary for the telephone line FXO.
Call table initialization FXS Function No.: -
Initialization of all parameters related to FXS routing table.
Call table initialization FXO Function No.:
Initialization of all parameters related to FXO routing table.
Call table initialization GSM Function No.: -
Initialization of all parameters related to GSM routing table.
Initialization of GSM & SIM Function No.: -
Initialization of all parameters related to the GSM network and SIM card (except
the PIN code).
SMS input initialization Function No.: -
Initialization of all parameters for SMS sending upon SMS input activation.
Global initialization Function No.: 999
Initialization of all 2N® SmartGate parameters including the PIN and service
password.
Only Global initialization can be done by phone line programming. As parameter of this
function service password followed by must be used. This operation isn‟t followed
by confirmation tone. Successful setting is followed by pause (aprox.10s), during this
time period is performed reset of configuration memory. Than is the gateway
restarted.