2N Fixed line replacement with 2N SmartGate - Manual v1.1.2 - Manual (Page 20)

Mounting 2.3
20
Wall mounting
2N® SmartGate is equipped with two hangings on the back side for wall mounting. For
drilling holes to the wall could be used drill pattern in QuickStart.
Power Supply Connection
2N® SmartGate is fed with 10-16V DC. Where a source other than the included power
supply adapter is used, the voltage range and polarity shown on the 2N® SmartGate
power supply connector have to be maintained.
Warning
 Do not activate the power supply until the antenna is connected to
2N® SmartGate to avoid the GSM module damage.
Figure 2.4
Zavěšení
2N ® SmartGate
na zeď