2N Fixed line replacement with 2N SmartGate - Manual v1.1.2 - Manual (Page 54)

Table of Parameters 3.2
54
Security Parameters
PIN – value Function No.: 700
Fill in the PIN value for automatic PIN entering upon 2N® SmartGate power up.
It is applied only if the SIM card is PIN secured. If the given PIN fails to match
the SIM, it is deleted automatically. If entered via a telephone line upon 2N®
SmartGate start, the PIN is stored automatically.
Setting options: 0, 4-8 characters (0-9)
Upon full initialization: blank
Service password Function No.: 900
Fill the service password for programming via a telephone line. Some parameters
can be programmed by DTMF dialing and so the access to programming must be
password-protected.
Setting options: 4-8 characters (0-9)
Upon full initialization: 12345