2N Fixed line replacement with 2N SmartGate - Manual v1.1.2 - Manual (Page 27)

2N® SmartGate parameters configuration 3.1
27
Further Data Handling Options
The gateway configuration settings can be saved in a PC file and reloaded into the
PCManager. This is recommended for backing up of current configuration
Caution
 The table Security includes the PIN code and service password. These
parameters have a special handling. They are not saved in a PC file for
security reasons. If you load a PC file into the PCManager and then into
SmartGate, the PIN and service password should not change unless you
change them manually before saving.
Caution
 All tables are filled-in with default values after PCManager start. It is
recommended to load data from 2N® SmartGate before parameters
programming and saving. If you only save data after PCManager start, all
parameters except the PIN and service password in the 2N® SmartGate
memory will have default values.
Caution
 The PIN and service password can only be modified either manually or by
full initialization.