2N Fixed line replacement with 2N SmartGate - Manual v1.1.2 - Manual (Page 60)

Voice function 4.1
60
3. Wait for information tone. You may wait about 3 seconds.
4. Hook on.
Information tones:
Confirmation - OK:
 Confirms that the service was configured correctly.
Confirmation - bad:
 Service was not correctly configured
 Service isn‟t activated by your provider
Confirmation - service activated:
 Confirms that the service was configured correctly and the service is activated.
Confirmation - service deactivated:
 Confirms that the service was configured correctly and the service is
deactivated.
Call forwarding
For forwarding activation you must specify <Telephone number> the calls will be
forwarded to. You may specify <Call type>, if you want to forward specified call
type only. You may specify <Delay time> in seconds for forwarding if no answer
too.
Description of <Call type> field codes:
Voice:
Data:
Fax:
Call forwarding unconditional
If activated, incoming calls will be always forwarded to the configured telephone
number.
Activation for all call types:
<Telephone number>
Activation for selected call type:
<Telephone number> <Call type>
Deactivation: