Firmware upgrade, Upgrading procedure, 2n® smartgate parameters configuration 3.1 – 2N Fixed line replacement with 2N SmartGate - Manual v1.1.2 User Manual
Page 29
2N® SmartGate parameters configuration
3.1
29
Firmware Upgrade
The manufacturer responds to clients' requirements with periodical firmware
updating. The current 2N® SmartGate firmware, PCManager and User Manual are
available on
The latest firmware version is always included in every new
PCManager installation.
Upgrading procedure:
1. Run the PCManager, select the language for displaying texts on the right-hand
side.
2. Click on the upgrade – if 2N® SmartGate is not in its special programming
mode, you are invited to switch 2N® SmartGate off and on again.
3. If there is more then one file in the PCManager directory, chose one of them.
The upgrade takes place automatically. Do not switch your PC or 2N®
SmartGate off during the process of upgrading!
Caution
The PCManager checks the software version in 2N® SmartGate and the
upgrade file. If the version in the file is new, everything is all right. An
identical or earlier software version is stored in 2N® SmartGate too but
the PCManager requires confirmation to be on the safe side.
Caution
The manufacturer responds to clients' requirements with periodical
firmware updating. The latest 2N® SmartGate firmware, PCManager and
User Manual are available on