Barco R9002328 - Manual (Page 100)

R5975059A BARCOVISION 708 200498
RANDOM ACCESS ADJUSTMENT MODE
RANDOM
ACCESS
ADJUSTMENT
MODE
R5975059A BARCOVISION 708 200498
RANDOM ACCESS ADJUSTMENT MODE
RANDOM
ACCESS
ADJUSTMENT
MODE
8-23 8-23
Vertical Linearity Adjustment
The vertical linearity adjust-
ment function corrects for ver-
tical non-linearities which ex-
tend from the center of the
image to the top and bottom of
the image.
Push the control disc up or
down to highlight V LINEAR-
ITY on the Geometry menu and
then press ENTER.
ENTER will select vertical linearity adjust-
ment
EXIT returns to random access adjustment
mode menu.
ADJUST returns to operational mode
Adjust the vertical linearity with
the control disc until the dis-
tances between the horizontal
lines of the set up pattern are
equal.
EXIT will return to the Geometry menu
Select with ê or é
then <ENTER>
<EXIT> to return.
GEOMETRY
H PHASE
RASTER SHIFT
LEFT-RIGHT (E-W)
TOP-BOTTOM (N-S)
H SIZE
V LINEARITY
V SIZE
BLANKING
V
LINEARITY
70
Vertical Linearity Adjustment
The vertical linearity adjust-
ment function corrects for ver-
tical non-linearities which ex-
tend from the center of the
image to the top and bottom of
the image.
Push the control disc up or
down to highlight V LINEAR-
ITY on the Geometry menu and
then press ENTER.
ENTER will select vertical linearity adjust-
ment
EXIT returns to random access adjustment
mode menu.
ADJUST returns to operational mode
Adjust the vertical linearity with
the control disc until the dis-
tances between the horizontal
lines of the set up pattern are
equal.
EXIT will return to the Geometry menu
Select with ê or é
then <ENTER>
<EXIT> to return.
GEOMETRY
H PHASE
RASTER SHIFT
LEFT-RIGHT (E-W)
TOP-BOTTOM (N-S)
H SIZE
V LINEARITY
V SIZE
BLANKING
V
LINEARITY
70