Barco R9002328 - Manual (Page 102)

R5975059A BARCOVISION 708 200498
RANDOM ACCESS ADJUSTMENT MODE
RANDOM
ACCESS
ADJUSTMENT
MODE
R5975059A BARCOVISION 708 200498
RANDOM ACCESS ADJUSTMENT MODE
RANDOM
ACCESS
ADJUSTMENT
MODE
8-25 8-25
Blanking Adjustments
Blanking adjustments affect only the edges of the projected image and are used
to frame the projected image on to the screen and to hide or black out unwanted
information (or noise). A 0% on the bar scale indicates no blanking.
To start up the Blanking adjustments, follow the next procedure :
The following blanking corrections are possible
:
- Top blanking
- Bottom blanking
- Left blanking
Push the control disc up or
down to highlight BLANKING
on the Geometry menu and then
press ENTER.
ENTER will select blanking
adjustment menu.
EXIT returns to random ac-
cess adjustment mode
menu.
ADJUST returns to opera-
tional mode
- Right blanking
Therefore :
- If the internal # pattern was
selected, this pattern remains
on the screen.
- If the genlocked pattern was
selected, the external source
will be displayed.
Select with ê or é
then <ENTER>
<EXIT> to return.
GEOMETRY
H PHASE
RASTER SHIFT
LEFT-RIGHT (E-W)
TOP-BOTTOM (N-S)
H SIZE
V LINEARITY
V SIZE
BLANKING
Select with ê or é
then <ENTER>
<EXIT> to return.
BLANKING
TOP
BOTTOM
LEFT
RIGHT
Blanking Adjustments
Blanking adjustments affect only the edges of the projected image and are used
to frame the projected image on to the screen and to hide or black out unwanted
information (or noise). A 0% on the bar scale indicates no blanking.
To start up the Blanking adjustments, follow the next procedure :
The following blanking corrections are possible
:
- Top blanking
- Bottom blanking
- Left blanking
Push the control disc up or
down to highlight BLANKING
on the Geometry menu and then
press ENTER.
ENTER will select blanking
adjustment menu.
EXIT returns to random ac-
cess adjustment mode
menu.
ADJUST returns to opera-
tional mode
- Right blanking
Therefore :
- If the internal # pattern was
selected, this pattern remains
on the screen.
- If the genlocked pattern was
selected, the external source
will be displayed.
Select with ê or é
then <ENTER>
<EXIT> to return.
GEOMETRY
H PHASE
RASTER SHIFT
LEFT-RIGHT (E-W)
TOP-BOTTOM (N-S)
H SIZE
V LINEARITY
V SIZE
BLANKING
Select with ê or é
then <ENTER>
<EXIT> to return.
BLANKING
TOP
BOTTOM
LEFT
RIGHT