Barco R9002328 - Manual (Page 126)

R5975059A BARCOVISION 708 200498
SERVICE MODE
SERVICE
MODE
R5975059A BARCOVISION 708 200498
SERVICE MODE
SERVICE
MODE
9-21 9-21
Select with ê or é
then <ENTER>
<EXIT> to return.
Highlights 'I²C Diagnostics' by
pushing the control disc up or
down and press ENTER.
The I²C diagnostics menu gives
an overview of the I²C failures
inside the projector.
SERVICE MODE
PROJECTOR SETUP
MEMORY MANAGEMENT
COMMON SETTINGS
I²C DIAGNOSTICS
Scroll with è or ç
then <ENTER>
<EXIT> to return.
I²C DIAGNOSTICS
Failures :
addr IC number
mod.name
48H IC200 DECODER
To scroll through the failure list, push
the control disc up or down.
The I²C address, IC number and mod-
ule name will be given in I²C diagnostic
menu.
When no errors are detected, the
following message will appear on the
screen :
"No errors on I²C-bus detected".
I²C Diagnostics
Select with ê or é
then <ENTER>
<EXIT> to return.
Highlights 'I²C Diagnostics' by
pushing the control disc up or
down and press ENTER.
The I²C diagnostics menu gives
an overview of the I²C failures
inside the projector.
SERVICE MODE
PROJECTOR SETUP
MEMORY MANAGEMENT
COMMON SETTINGS
I²C DIAGNOSTICS
Scroll with è or ç
then <ENTER>
<EXIT> to return.
I²C DIAGNOSTICS
Failures :
addr IC number
mod.name
48H IC200 DECODER
To scroll through the failure list, push
the control disc up or down.
The I²C address, IC number and mod-
ule name will be given in I²C diagnostic
menu.
When no errors are detected, the
following message will appear on the
screen :
"No errors on I²C-bus detected".
I²C Diagnostics