Service mode, Undo green convergence mid, Common settings – Barco R9002328 User Manual
Page 122
R5975059A BARCOVISION 708 200498
SERVICE MODE
SERVICE
MODE
R5975059A BARCOVISION 708 200498
SERVICE MODE
SERVICE
MODE
9-17
9-17
Select with ê or é
then <ENTER>
<EXIT> to return.
Select with ê or é
then <ENTER>
<EXIT> to return.
Select with ê or é
then <ENTER>
<EXIT> to return.
Undo green convergence mid
Only available when the projector is
equipped with green convergence
adjustments.
The item 'Undo green convergence
mid' will automatically be displayed
when the green convergence is
switched to midposition.
Press ENTER to switch on the green
convergence.
MEMORY MANAGEMENT
Common Settings
Highlight 'Common settings' by push-
ing the control disc up or down and
press ENTER to display the common
settings menu.
Within the common settings menu, the
following items can be set up or
executed :
- G2 adjustment
- CRT run in cycle
- Projector warm up
- CRT drive mode
SERVICE MODE
PROJECTOR SETUP
MEMORY MANAGEMENT
COMMON SETTINGS
I²C DIAGNOSTICS
COMMON SETTINGS
G2 ADJUSTMENT
CRT RUN IN CYCLE
PROJECTOR WARM UP
CRT DRIVE MODE
COPY A BLOCK
DELETE A BLOCK
DELETE ALL BLOCKS
ALL SETTINGS TO MIDPOS
R & B CONVERGENCE MID
UNDO GR CONVERGENCE MID
Select with ê or é
then <ENTER>
<EXIT> to return.
Select with ê or é
then <ENTER>
<EXIT> to return.
Select with ê or é
then <ENTER>
<EXIT> to return.
Undo green convergence mid
Only available when the projector is
equipped with green convergence
adjustments.
The item 'Undo green convergence
mid' will automatically be displayed
when the green convergence is
switched to midposition.
Press ENTER to switch on the green
convergence.
MEMORY MANAGEMENT
Common Settings
Highlight 'Common settings' by push-
ing the control disc up or down and
press ENTER to display the common
settings menu.
Within the common settings menu, the
following items can be set up or
executed :
- G2 adjustment
- CRT run in cycle
- Projector warm up
- CRT drive mode
SERVICE MODE
PROJECTOR SETUP
MEMORY MANAGEMENT
COMMON SETTINGS
I²C DIAGNOSTICS
COMMON SETTINGS
G2 ADJUSTMENT
CRT RUN IN CYCLE
PROJECTOR WARM UP
CRT DRIVE MODE
COPY A BLOCK
DELETE A BLOCK
DELETE ALL BLOCKS
ALL SETTINGS TO MIDPOS
R & B CONVERGENCE MID
UNDO GR CONVERGENCE MID