Barco R9002328 - Manual (Page 28)

R5975059A BARCOVISION 708 200498
CONNECTIONS
CONNECTIONS
R5975059A BARCOVISION 708 200498
CONNECTIONS
CONNECTIONS
4-5 4-5
Input selection
a. Press digit button 2 on the RCU or
b. with the local keypad :
(to gain access to the local keypad, see Local keypad in chapter Location
and functions of control.)
- Press ADJUST key, the General access menu is displayed on the screen.
- Use the control disc to
highlight 2.
- Press ENTER to select
the highlighted source.
GENERAL ACCESS
Select with й , к
з or è
then <ENTER>
<EXIT> to return
SHARPNESS
TINT
COLOR
BRIGHTNESS
CONTRAST
5 6
3 4
1 2
Enter ADJUST
Depending on the priority setting in the
'Picture Tuning menu', Video or S-Video
can be displayed.
If the setting is not correct, start up the
adjustment mode by pushing on the
ADJUST key.
ADJUSTMENT MODE
Select a path from below :
GUIDED
RANDOM ACCESS
INSTALLATION
SERVICE
IRIS
Source 02
Select with é or ê
then <ENTER>
<EXIT> to return.
Select with é or ê
<ENTER> accept
<EXIT> to return.
Choose a setup pattern
from below :
SELECTED SOURCE
GENLOCKED PATTERN
INTERNAL # PATTERN
Source 02
Select with é or ê
<ENTER> accept
<EXIT> to return.
RANDOM ACCESS
ADJUSTMENT MODE
PICTURE TUNING
GEOMETRY
CONVERGENCE
FOCUSING
COLOR SELECT
ORBITING
CONTR. MODULATION
SOFT EDGE
Select with é or ê
<ENTER> accept
<EXIT> to return.
PICTURE TUNING
COLOR BALANCE
SYNC : FAST
PORT2 : S-VIDEO
LINE DOUBLER : ON
Highlight 'Port 2 : Video' and press ENTER
to toggle between VIDEO and S-VIDEO.
Press EXIT to return.
Press ADJUST to return to operational
mode.
Highlight 'Picture Tuning' and press
ENTER.
Select 'Selected source' and press ENTER.
Select 'Random Access' and press
ENTER.
Input selection
a. Press digit button 2 on the RCU or
b. with the local keypad :
(to gain access to the local keypad, see Local keypad in chapter Location
and functions of control.)
- Press ADJUST key, the General access menu is displayed on the screen.
- Use the control disc to
highlight 2.
- Press ENTER to select
the highlighted source.
GENERAL ACCESS
Select with й , к
з or è
then <ENTER>
<EXIT> to return
SHARPNESS
TINT
COLOR
BRIGHTNESS
CONTRAST
5 6
3 4
1 2
Enter ADJUST
Depending on the priority setting in the
'Picture Tuning menu', Video or S-Video
can be displayed.
If the setting is not correct, start up the
adjustment mode by pushing on the
ADJUST key.
ADJUSTMENT MODE
Select a path from below :
GUIDED
RANDOM ACCESS
INSTALLATION
SERVICE
IRIS
Source 02
Select with é or ê
then <ENTER>
<EXIT> to return.
Select with é or ê
<ENTER> accept
<EXIT> to return.
Choose a setup pattern
from below :
SELECTED SOURCE
GENLOCKED PATTERN
INTERNAL # PATTERN
Source 02
Select with é or ê
<ENTER> accept
<EXIT> to return.
RANDOM ACCESS
ADJUSTMENT MODE
PICTURE TUNING
GEOMETRY
CONVERGENCE
FOCUSING
COLOR SELECT
ORBITING
CONTR. MODULATION
SOFT EDGE
Select with é or ê
<ENTER> accept
<EXIT> to return.
PICTURE TUNING
COLOR BALANCE
SYNC : FAST
PORT2 : S-VIDEO
LINE DOUBLER : ON
Highlight 'Port 2 : Video' and press ENTER
to toggle between VIDEO and S-VIDEO.
Press EXIT to return.
Press ADJUST to return to operational
mode.
Highlight 'Picture Tuning' and press
ENTER.
Select 'Selected source' and press ENTER.
Select 'Random Access' and press
ENTER.