Barco R9002328 User Manual

Page 21

Advertising

LOCATION AND FUNCTION OF CONTROLS

LOCATION

AND

FUNCTION

OF
CONTROLS

LOCATION AND FUNCTION OF CONTROLS

LOCATION

AND

FUNCTION

OF
CONTROLS

R5975059A BARCOVISION 708 200498

2-6

Back light key : when activated, all keys will be lit up and visible in the

dark.

ADJ. : adjust key, to enter or exit the adjustment mode.

Address key (sunk key), to enter the address of the projector (between

0 and 9). Press the address key, followed by pressing one digit button

between 0 and 9.

STBY : stand by button : - to initiate remote power up operation

- to stop projection without main power off.

Pause :to blank the image, press PAUSE. The image disappears but full

power is retained for immediate restarting.

Digit buttons : direct input selection.

Picture controls : use these buttons to obtain the desired level (see also

'Controlling') for each picture function.

TEXT : when adjusting one of the image controls during a meeting, the

displayed bar scale can be removed by pressing 'TEXT' key first. To re-

display the bar scale on the screen, press 'TEXT' key again. 'TEXT' key

is only active in operational mode. When 'TEXT' is off, no warning message

will be displayed.

ENTER : to start up the adjustment mode or to confirm an adjustment or

selection in the adjustment mode.

EXIT : to leave the adjustment mode or to scroll upwards when in the

adjustment mode.

Control disc : to make menu selections when in the adjustment mode.

Also allows to increment or decrement an adjustment in the adjustment

mode.

control disc up = up arrow in the menus

control disc down = down arrow in the menus

control disc to the right = arrow to the right on the menus

control disc to the left = arrow to the left on the menus

RC operating indication : lights up when a button on the remote control

is pressed. (This is a visual indicator to check the operation of the remote

control)

2
3