Barco R9002328 - Manual (Page 70)

R5975059A BARCOVISION 708 200498
GUIDED
ADJUSTMENT
MODE
GUIDED ADJUSTMENT MODE
GUIDED
ADJUSTMENT
MODE
GUIDED ADJUSTMENT MODE
R5975059A BARCOVISION 708 200498 7-17 7-17
Size-linearity Adjustment
Size adjustments affect the
height and width of the pro-
jected image. The vertical lin-
earity adjustment is used to
adjust the horizontal lines of
the setup pattern until the spac-
ing between them is even. The
horizontal phase adjustment is
used to shift the image hori-
zontally across the raster.
Vertical Linearity Adjustment
Adjust the vertical linearity with
the control disc until the dis-
tance between the horizontal
lines of the set up pattern are
equal.
Correct by pushing
the control disc
down
Correct by pushing
the control disc up.
<ENTER> to continue
<EXIT> to return
ADJUST VERTICAL SIZE
AND LINEARITY, IN ORDER
TO ADJUST THE DESIRED
IMAGE DIMENSIONS.
USE THE H PHASE CONTROL
TO SHIFT THE IMAGE
WITH RESPECT TO
THE RASTER.
SIZE-LINEARITY
Size-linearity Adjustment
Size adjustments affect the
height and width of the pro-
jected image. The vertical lin-
earity adjustment is used to
adjust the horizontal lines of
the setup pattern until the spac-
ing between them is even. The
horizontal phase adjustment is
used to shift the image hori-
zontally across the raster.
Vertical Linearity Adjustment
Adjust the vertical linearity with
the control disc until the dis-
tance between the horizontal
lines of the set up pattern are
equal.
Correct by pushing
the control disc
down
Correct by pushing
the control disc up.
<ENTER> to continue
<EXIT> to return
ADJUST VERTICAL SIZE
AND LINEARITY, IN ORDER
TO ADJUST THE DESIRED
IMAGE DIMENSIONS.
USE THE H PHASE CONTROL
TO SHIFT THE IMAGE
WITH RESPECT TO
THE RASTER.
SIZE-LINEARITY