Barco R9002328 - Manual (Page 115)

SERVICE MODE
R5975059A BARCOVISION 708 200498
SERVICE
MODE
SERVICE MODE
R5975059A BARCOVISION 708 200498
SERVICE
MODE
9-10 9-10
Select with ê or é
then <ENTER>
<EXIT> to return.
Select with ê or é
<ENTER> to toggle
<EXIT> to return.
BARCO_logo
The BARCO logo can be added to the
image, in overlay or in background, on
any place on the screen.
To add the BARCO logo or to change
a setting in the BARCO logo menu,
highlight 'BARCO logo' by pushing the
control disc up or down and press
ENTER to select.
WARNING : Continuous use of the
BARCO logo damages the RED
CRT.
PROJECTOR SETUP
IDENTIFICATION
TOTAL RUN TIME
CHANGE PASSWORD
CHANGE LANGUAGE
CHANGE PROJECTOR ADDRESS
CHANGE BAUDRATE
POWER UP MODE : operating
BARCO LOGO
ENTER displays the BARCO logo menu.
EXIT returns to the Service menu
BARCO LOGO
MODE : ON
SIZE : SMALL
BACKGROUND : ON
ORBITING : ON
You can move the logo
on the screen, using
the arrow keys.
WARNING : continuous
use of the BARCO logo
damages the RED CRT !
The BARCO logo menu will be dis-
played on the screen. Within this
menu, four toggle settings are avail-
able.
Mode [ON/OFF] :
ON : BARCO logo will be displayed
on the screen.
To position the logo on the screen,
push the control disc up, down, to
the left or to the right until the
desired position is reached.
OFF : No BARCO logo displayed
on the screen.
Size [SMALL/LARGE] :
SMALL : Small BARCO logo will be
displayed if mode is on.
LARGE : Large (double size)
BARCO logo will be displayed if
mode is on.
Background [ON/OFF] :
ON : BARCO logo will be displayed
on a black background.
BARCO
OFF : BARCO logo will be dis-
played without any background.
BARCO
Orbiting [ON/OFF] :
ON : on the BARCO logo will orbit
around it axis.
OFF : no orbit of the BARCO logo
Select with ê or é
then <ENTER>
<EXIT> to return.
Select with ê or é
<ENTER> to toggle
<EXIT> to return.
BARCO_logo
The BARCO logo can be added to the
image, in overlay or in background, on
any place on the screen.
To add the BARCO logo or to change
a setting in the BARCO logo menu,
highlight 'BARCO logo' by pushing the
control disc up or down and press
ENTER to select.
WARNING : Continuous use of the
BARCO logo damages the RED
CRT.
PROJECTOR SETUP
IDENTIFICATION
TOTAL RUN TIME
CHANGE PASSWORD
CHANGE LANGUAGE
CHANGE PROJECTOR ADDRESS
CHANGE BAUDRATE
POWER UP MODE : operating
BARCO LOGO
ENTER displays the BARCO logo menu.
EXIT returns to the Service menu
BARCO LOGO
MODE : ON
SIZE : SMALL
BACKGROUND : ON
ORBITING : ON
You can move the logo
on the screen, using
the arrow keys.
WARNING : continuous
use of the BARCO logo
damages the RED CRT !
The BARCO logo menu will be dis-
played on the screen. Within this
menu, four toggle settings are avail-
able.
Mode [ON/OFF] :
ON : BARCO logo will be displayed
on the screen.
To position the logo on the screen,
push the control disc up, down, to
the left or to the right until the
desired position is reached.
OFF : No BARCO logo displayed
on the screen.
Size [SMALL/LARGE] :
SMALL : Small BARCO logo will be
displayed if mode is on.
LARGE : Large (double size)
BARCO logo will be displayed if
mode is on.
Background [ON/OFF] :
ON : BARCO logo will be displayed
on a black background.
BARCO
OFF : BARCO logo will be dis-
played without any background.
BARCO
Orbiting [ON/OFF] :
ON : on the BARCO logo will orbit
around it axis.
OFF : no orbit of the BARCO logo