Barco R9002328 - Manual (Page 129)

MESSAGES, WARNINGS AND FAILURES
R5975059A BARCOVISION 708 200498
MESSAGES, WARNINGS AND FAILURES
R5975059A BARCOVISION 708 200498 10-2
MESSAGES,
WARNINGS
AND
FAILURES
10-2
MESSAGES,
WARNINGS
AND
FAILURES
When selecting a new source, information about this
source will be displayed on the screen. Source
number, horizontal and vertical frequencies of the
displayed source.
SOURCE 01
Announcement of the selected source.
INPUT 01
Fh= 15.6 kHz
Fv= 050 Hz
enter
password
x x x x
Message to enter your password. Password contains
4 digits.
text on
text off
These messages will be displayed on the screen when
pushing the TEXT key.
Text ON : the 'bar scale indication' will be enabled
during the change of an analog control in the 'opera-
tional mode' + all warnings and failures will be dis-
played.
Text OFF : the 'bar scale indication' will be disabled
during the change of an analog control in the 'opera-
tional mode' + all warnings and failures will not be
displayed.
PROJECTOR
ADDRESS :
003
Indication of the projector address when activating the
'ADDRESS' button on the RCU with a pencil or other
small object.
WARNING :
input not
available
When using the projector with the RCVDS, this warn-
ing will be displayed when selecting an input slot of an
RCVDS where the input board is missing.
When selecting a new source, information about this
source will be displayed on the screen. Source
number, horizontal and vertical frequencies of the
displayed source.
SOURCE 01
Announcement of the selected source.
INPUT 01
Fh= 15.6 kHz
Fv= 050 Hz
enter
password
x x x x
Message to enter your password. Password contains
4 digits.
text on
text off
These messages will be displayed on the screen when
pushing the TEXT key.
Text ON : the 'bar scale indication' will be enabled
during the change of an analog control in the 'opera-
tional mode' + all warnings and failures will be dis-
played.
Text OFF : the 'bar scale indication' will be disabled
during the change of an analog control in the 'opera-
tional mode' + all warnings and failures will not be
displayed.
PROJECTOR
ADDRESS :
003
Indication of the projector address when activating the
'ADDRESS' button on the RCU with a pencil or other
small object.
WARNING :
input not
available
When using the projector with the RCVDS, this warn-
ing will be displayed when selecting an input slot of an
RCVDS where the input board is missing.