Barco R9002328 - Manual (Page 116)

R5975059A BARCOVISION 708 200498
SERVICE MODE
SERVICE
MODE
R5975059A BARCOVISION 708 200498
SERVICE MODE
SERVICE
MODE
9-11 9-11
Memory management
Highlight 'Memory management' by
pushing the control disc up or down
and press ENTER to display the
memory management menu.
Within the memory management menu,
the following items can be consulted
or executed :
- copy a block
- delete a block
- delete all blocks
- all settings to midposition
- R & B convergence to mid
- Gr convergence mid (only if green
convergence is available)
Copy a block
The copy a block function copies the
settings of a selected block into the
active block.
Highlight copy a block with the con-
trol disc and press ENTER.
ENTER will select the highlighted item.
EXIT returns to the Path Selection main
menu.
ADJUST returns to the Operational mode.
Select with ê or é
then <ENTER>
<EXIT> to return.
Select with ê or é
then <ENTER>
<EXIT> to return.
Select with ê or é
then <ENTER>
<EXIT> to return.
SERVICE MODE
PROJECTOR SETUP
MEMORY MANAGEMENT
COMMON SETTINGS
I²C DIAGNOSTICS
MEMORY MANAGEMENT
COPY A BLOCK
DELETE A BLOCK
DELETE ALL BLOCKS
ALL SETTINGS TO MIDPOS
R & B CONVERGENCE MID
GR CONVERGENCE MID
MEMORY MANAGEMENT
COPY A BLOCK
DELETE A BLOCK
DELETE ALL BLOCKS
ALL SETTINGS TO MIDPOS
R & B CONVERGENCE MID
GR CONVERGENCE MID
Memory management
Highlight 'Memory management' by
pushing the control disc up or down
and press ENTER to display the
memory management menu.
Within the memory management menu,
the following items can be consulted
or executed :
- copy a block
- delete a block
- delete all blocks
- all settings to midposition
- R & B convergence to mid
- Gr convergence mid (only if green
convergence is available)
Copy a block
The copy a block function copies the
settings of a selected block into the
active block.
Highlight copy a block with the con-
trol disc and press ENTER.
ENTER will select the highlighted item.
EXIT returns to the Path Selection main
menu.
ADJUST returns to the Operational mode.
Select with ê or é
then <ENTER>
<EXIT> to return.
Select with ê or é
then <ENTER>
<EXIT> to return.
Select with ê or é
then <ENTER>
<EXIT> to return.
SERVICE MODE
PROJECTOR SETUP
MEMORY MANAGEMENT
COMMON SETTINGS
I²C DIAGNOSTICS
MEMORY MANAGEMENT
COPY A BLOCK
DELETE A BLOCK
DELETE ALL BLOCKS
ALL SETTINGS TO MIDPOS
R & B CONVERGENCE MID
GR CONVERGENCE MID
MEMORY MANAGEMENT
COPY A BLOCK
DELETE A BLOCK
DELETE ALL BLOCKS
ALL SETTINGS TO MIDPOS
R & B CONVERGENCE MID
GR CONVERGENCE MID