Barco R9002328 - Manual (Page 71)

GUIDED ADJUSTMENT MODE
R5975059A BARCOVISION 708 200498
GUIDED ADJUSTMENT MODE
R5975059A BARCOVISION 708 200498 7-18
GUIDED
ADJUSTMENT
MODE
7-18
GUIDED
ADJUSTMENT
MODE
Vertical Size Adjustment
Adjust the vertical size by push-
ing the control disc up or down
until the exact image height is
obtained.
Note :
- if the internal # pattern was
selected, this pattern re-
mains on the screen.
- if the genlocked pattern was
selected, the external
source will be displayed.
Hint :
In order to avoid loss of reso-
lution in the projected image
and to ensure maximum CRT
longevity, do not use an ex-
cessively small vertical size
setting.
A bar scale and a number indi-
cator (between 0 and 100 )
give a visual indication of the
vertical size adjustment.
Correct by pushing
the control disc
down.
Correct by pushing
the control disc up.
V SIZE
70
Vertical Size Adjustment
Adjust the vertical size by push-
ing the control disc up or down
until the exact image height is
obtained.
Note :
- if the internal # pattern was
selected, this pattern re-
mains on the screen.
- if the genlocked pattern was
selected, the external
source will be displayed.
Hint :
In order to avoid loss of reso-
lution in the projected image
and to ensure maximum CRT
longevity, do not use an ex-
cessively small vertical size
setting.
A bar scale and a number indi-
cator (between 0 and 100 )
give a visual indication of the
vertical size adjustment.
Correct by pushing
the control disc
down.
Correct by pushing
the control disc up.
V SIZE
70