Barco R9002328 - Manual (Page 94)

R5975059A BARCOVISION 708 200498
RANDOM ACCESS ADJUSTMENT MODE
RANDOM
ACCESS
ADJUSTMENT
MODE
R5975059A BARCOVISION 708 200498
RANDOM ACCESS ADJUSTMENT MODE
RANDOM
ACCESS
ADJUSTMENT
MODE
8-17 8-17
Seagull Correction
Use this correction after the image has
been adjusted with top and bottom bow
and keystone. If still a deformation (like a
seagull) on top and bottom of the image is
visible, proceed to the seagull correction.
Due to interaction, it is possible that the top
and bottom bow have to be readjusted
after adjusting the seagull correction to
obtain an improved image. The default
value on the bar scale of this correction is
50.
Push the control disc up or down to select
the 'Seagull Correction' and press ENTER
to select.
Eliminate the deformation by pushing the
control disc up or down until a straight line
is obtained.
TOP-BOTTOM (N-S)
H CENTERLINE BOW
H CENTERLINE SKEW
TOP KEYSTONE
TOP BOW
BOTTOM KEYSTONE
BOTTOM BOW
SEAGULL CORRECTION
Select with ê or é
then <ENTER>
<EXIT> to return.
GEOMETRY
H PHASE
RASTER SHIFT
LEFT-RIGHT (E-W)
LEFT SIDE CORRECTION
TOP-BOTTOM (N-S)
H SIZE
V LINEARITY
V SIZE
BLANKING
Select with ê or é
then <ENTER>
<EXIT> to return.
ENTER will return to Top-Bottom adjust-
ment menu
EXIT will return to Geometry menu
Seagull Correction
Use this correction after the image has
been adjusted with top and bottom bow
and keystone. If still a deformation (like a
seagull) on top and bottom of the image is
visible, proceed to the seagull correction.
Due to interaction, it is possible that the top
and bottom bow have to be readjusted
after adjusting the seagull correction to
obtain an improved image. The default
value on the bar scale of this correction is
50.
Push the control disc up or down to select
the 'Seagull Correction' and press ENTER
to select.
Eliminate the deformation by pushing the
control disc up or down until a straight line
is obtained.
TOP-BOTTOM (N-S)
H CENTERLINE BOW
H CENTERLINE SKEW
TOP KEYSTONE
TOP BOW
BOTTOM KEYSTONE
BOTTOM BOW
SEAGULL CORRECTION
Select with ê or é
then <ENTER>
<EXIT> to return.
GEOMETRY
H PHASE
RASTER SHIFT
LEFT-RIGHT (E-W)
LEFT SIDE CORRECTION
TOP-BOTTOM (N-S)
H SIZE
V LINEARITY
V SIZE
BLANKING
Select with ê or é
then <ENTER>
<EXIT> to return.
ENTER will return to Top-Bottom adjust-
ment menu
EXIT will return to Geometry menu