Barco R9002328 - Manual (Page 101)

RANDOM ACCESS ADJUSTMENT MODE
R5975059A BARCOVISION 708 200498
RANDOM ACCESS ADJUSTMENT MODE
R5975059A BARCOVISION 708 200498 8-24
RANDOM
ACCESS
ADJUSTMENT
MODE
8-24
RANDOM
ACCESS
ADJUSTMENT
MODE
Vertical Size Adjustment
Push the control disc up or
down to highlight V SIZE on
the Geometry menu and then
press ENTER.
ENTER will select vertical size adjustment
EXIT returns to random access adjustment
mode menu,.
ADJUST returns to operational mode
Adjust the vertical size by push-
ing the control disc up or down
until the exact image height is
obtained.
Note :
- If the internal # pattern was selected, this
pattern remains on the screen.
- If the genlocked pattern was selected, the
external source will be displayed.
A bar scale and a number indicator give a visual
indication of the vertical size adjustment.
Hint : In order to avoid loss of resolution in the
projected image and to ensure maximum CRT
longevity, do not use an excessively small
vertical size setting.
EXIT will return to Geometry.
Image too
tall
Image too
short
Select with ê or é
then <ENTER>
<EXIT> to return.
GEOMETRY
H PHASE
RASTER SHIFT
LEFT-RIGHT (E-W)
TOP-BOTTOM (N-S)
H SIZE
V LINEARITY
V SIZE
BLANKING
V SIZE
70
Vertical Size Adjustment
Push the control disc up or
down to highlight V SIZE on
the Geometry menu and then
press ENTER.
ENTER will select vertical size adjustment
EXIT returns to random access adjustment
mode menu,.
ADJUST returns to operational mode
Adjust the vertical size by push-
ing the control disc up or down
until the exact image height is
obtained.
Note :
- If the internal # pattern was selected, this
pattern remains on the screen.
- If the genlocked pattern was selected, the
external source will be displayed.
A bar scale and a number indicator give a visual
indication of the vertical size adjustment.
Hint : In order to avoid loss of resolution in the
projected image and to ensure maximum CRT
longevity, do not use an excessively small
vertical size setting.
EXIT will return to Geometry.
Image too
tall
Image too
short
Select with ê or é
then <ENTER>
<EXIT> to return.
GEOMETRY
H PHASE
RASTER SHIFT
LEFT-RIGHT (E-W)
TOP-BOTTOM (N-S)
H SIZE
V LINEARITY
V SIZE
BLANKING
V SIZE
70