Barco R9002328 - Manual (Page 74)

R5975059A BARCOVISION 708 200498
GUIDED
ADJUSTMENT
MODE
GUIDED ADJUSTMENT MODE
GUIDED
ADJUSTMENT
MODE
GUIDED ADJUSTMENT MODE
R5975059A BARCOVISION 708 200498 7-21 7-21
Blanking Adjustment
Blanking adjustments affect
only the edges of the projected
image and are used to frame
the projected image on to the
screen and to hide or black out
unwanted information (or
noise). A 0% on the bar scale
indicates no blanking.
The following blanking correc-
tions are possible :
- top blanking
- bottom blanking
- left blanking
- right blanking
Note :
- if the internal # pattern was
selected, this pattern re-
mains on the screen.
- if the genlocked pattern was
selected, the external
source will be displayed.
ADJUST THE TOP, BOTTOM,
LEFT AND RIGHT BLANKING
IN ORDER TO FRAME
THE PROJECTED IMAGE
ONTO THE SCREEN.
BLANKING
<ENTER> to continue
<EXIT> to return
Blanking Adjustment
Blanking adjustments affect
only the edges of the projected
image and are used to frame
the projected image on to the
screen and to hide or black out
unwanted information (or
noise). A 0% on the bar scale
indicates no blanking.
The following blanking correc-
tions are possible :
- top blanking
- bottom blanking
- left blanking
- right blanking
Note :
- if the internal # pattern was
selected, this pattern re-
mains on the screen.
- if the genlocked pattern was
selected, the external
source will be displayed.
ADJUST THE TOP, BOTTOM,
LEFT AND RIGHT BLANKING
IN ORDER TO FRAME
THE PROJECTED IMAGE
ONTO THE SCREEN.
BLANKING
<ENTER> to continue
<EXIT> to return