Barco R9002328 - Manual (Page 109)

SERVICE MODE
R5975059A BARCOVISION 708 200498
SERVICE
MODE
SERVICE MODE
R5975059A BARCOVISION 708 200498
SERVICE
MODE
9-4 9-4
Projector Setup
Highlight 'Projector Set-Up' by push-
ing the control disc up or down and
press ENTER to display the projector
setup menu.
Within the projector setup menu, the
following items can be consulted or
set to the desired setting :
- Identification
- Total run time
- Change password
- Change language
- Change projector address
- Change baudrate
- Power up mode
- BARCO logo
Identification
Highlight 'Identification' with the con-
trol disc and press ENTER.
ENTER will start the selected item.
EXIT returns to the Service mode menu.
Select with ê or é
then <ENTER>
<EXIT> to return.
Select with ê or é
then <ENTER>
<EXIT> to return.
Select with ê or é
then <ENTER>
<EXIT> to return.
SERVICE MODE
PROJECTOR SETUP
MEMORY MANAGEMENT
COMMON SETTINGS
I²C DIAGNOSTICS
PROJECTOR SETUP
IDENTIFICATION
TOTAL RUN TIME
CHANGE PASSWORD
CHANGE LANGUAGE
CHANGE PROJECTOR ADDRESS
CHANGE BAUDRATE
POWER UP MODE : operating
BARCO LOGO
PROJECTOR SETUP
IDENTIFICATION
TOTAL RUN TIME
CHANGE PASSWORD
CHANGE LANGUAGE
CHANGE PROJECTOR ADDRESS
CHANGE BAUDRATE
POWER UP MODE : operating
BARCO LOGO
Projector Setup
Highlight 'Projector Set-Up' by push-
ing the control disc up or down and
press ENTER to display the projector
setup menu.
Within the projector setup menu, the
following items can be consulted or
set to the desired setting :
- Identification
- Total run time
- Change password
- Change language
- Change projector address
- Change baudrate
- Power up mode
- BARCO logo
Identification
Highlight 'Identification' with the con-
trol disc and press ENTER.
ENTER will start the selected item.
EXIT returns to the Service mode menu.
Select with ê or é
then <ENTER>
<EXIT> to return.
Select with ê or é
then <ENTER>
<EXIT> to return.
Select with ê or é
then <ENTER>
<EXIT> to return.
SERVICE MODE
PROJECTOR SETUP
MEMORY MANAGEMENT
COMMON SETTINGS
I²C DIAGNOSTICS
PROJECTOR SETUP
IDENTIFICATION
TOTAL RUN TIME
CHANGE PASSWORD
CHANGE LANGUAGE
CHANGE PROJECTOR ADDRESS
CHANGE BAUDRATE
POWER UP MODE : operating
BARCO LOGO
PROJECTOR SETUP
IDENTIFICATION
TOTAL RUN TIME
CHANGE PASSWORD
CHANGE LANGUAGE
CHANGE PROJECTOR ADDRESS
CHANGE BAUDRATE
POWER UP MODE : operating
BARCO LOGO