Barco R9002328 - Manual (Page 18)

LOCATION AND FUNCTION OF CONTROLS
LOCATION
AND
FUNCTION
OF
CONTROLS
R5975059A BARCOVISION 708 200498
LOCATION AND FUNCTION OF CONTROLS
LOCATION
AND
FUNCTION
OF
CONTROLS
R5975059A BARCOVISION 708 200498 2-3 2-3
1
AUTODIAGNOSIS DISPLAY
LED indication for service purposes.
-9V HOLD
DOWN
HD
COINC SF HOLD
DOWN
EHT
STANDBY -CONV -17V +17V +HTHD +CONV +9V +210V +30V
2
POWER (MAINS) SWITCH : press the switch to turn the projector ON.
Depending on the hardware set-up of the projector during installation,
the projector switches to ‘standby’ or to ‘operational mode’. If in
standby, the standby led in the autodiagnosis display lights up.
POWER (MAINS) INPUT: Connect the supplied ac power (mains) cord
here and to wall the outlet.
IR SENSOR
receiver for control signals transmitted from the RCU700.
VIDEO IN (Composite video, 1x BNC connector): allows a video tape
recorder, video camera, color receiver/monitor, etc. having video line
output to be connected to the projector.
S-VIDEO IN or second COMPONENT VIDEO IN: Separated Y/C (luma-
chroma) signal inputs and outputs for higher quality playback of Super
VHS signals (4-pin S-VIDEO connector). Second component video
in (luma pins.)
8
7
FRONT PANEL TERMINOLOGY
3
4
   
1
AUTODIAGNOSIS DISPLAY
LED indication for service purposes.
-9V HOLD
DOWN
HD
COINC SF HOLD
DOWN
EHT
STANDBY -CONV -17V +17V +HTHD +CONV +9V +210V +30V
2
POWER (MAINS) SWITCH : press the switch to turn the projector ON.
Depending on the hardware set-up of the projector during installation,
the projector switches to ‘standby’ or to ‘operational mode’. If in
standby, the standby led in the autodiagnosis display lights up.
POWER (MAINS) INPUT: Connect the supplied ac power (mains) cord
here and to wall the outlet.
IR SENSOR
receiver for control signals transmitted from the RCU700.
VIDEO IN (Composite video, 1x BNC connector): allows a video tape
recorder, video camera, color receiver/monitor, etc. having video line
output to be connected to the projector.
S-VIDEO IN or second COMPONENT VIDEO IN: Separated Y/C (luma-
chroma) signal inputs and outputs for higher quality playback of Super
VHS signals (4-pin S-VIDEO connector). Second component video
in (luma pins.)
8
7
FRONT PANEL TERMINOLOGY
3
4