Barco R9002328 User Manual
Page 57
GUIDED ADJUSTMENT MODE
R5975059A BARCOVISION 708 200498
GUIDED ADJUSTMENT MODE
R5975059A BARCOVISION 708 200498
7-4
GUIDED
ADJUSTMENT
MODE
7-4
GUIDED
ADJUSTMENT
MODE
Selecting Setup Pattern
If an external source is con-
nected to the projector, the
Setup pattern menu will be dis-
played. Push the control disc up
or down to highlight the desired
setup pattern and then press
ENTER.
Genlocked pattern : internally
generated cross hatch pattern,
locked on the external source.
Internal # pattern : internally
generated cross hatch pattern
and locked on internal gener-
ated sync signals. (No external
source necessary)
ENTER continues to Guided Adjustment
Mode or Internal # Pattern Selection
EXIT returns to Path Selection
ADJUST returns to operational mode
If no external source is con-
nected to the projector, the in-
ternal cross hatch pattern menu
will be displayed.
The menus in this manual are
created for an external source,
connected to one of the inputs,
and the 'Genlocked pattern' is
selected.
choose
a setup pattern
from below:
SELECTED SOURCE
GENLOCKED PATTERN
INTERNAL # PATTERN
Select with é or ê
then <ENTER>
<EXIT> to return
source 1
Selecting Setup Pattern
If an external source is con-
nected to the projector, the
Setup pattern menu will be dis-
played. Push the control disc up
or down to highlight the desired
setup pattern and then press
ENTER.
Genlocked pattern : internally
generated cross hatch pattern,
locked on the external source.
Internal # pattern : internally
generated cross hatch pattern
and locked on internal gener-
ated sync signals. (No external
source necessary)
ENTER continues to Guided Adjustment
Mode or Internal # Pattern Selection
EXIT returns to Path Selection
ADJUST returns to operational mode
If no external source is con-
nected to the projector, the in-
ternal cross hatch pattern menu
will be displayed.
The menus in this manual are
created for an external source,
connected to one of the inputs,
and the 'Genlocked pattern' is
selected.
choose
a setup pattern
from below:
SELECTED SOURCE
GENLOCKED PATTERN
INTERNAL # PATTERN
Select with é or ê
then <ENTER>
<EXIT> to return
source 1