Barco R9002328 User Manual
Page 120
R5975059A BARCOVISION 708 200498
SERVICE MODE
SERVICE
MODE
R5975059A BARCOVISION 708 200498
SERVICE MODE
SERVICE
MODE
9-15
9-15
ENTER will set all settings to their
midposition. EXIT will cancel the op-
eration to set all settings to their
midposition.
Undo all settings to midpos
When "All settings to midpos" is se-
lected, all settings are set to their
midposition. To cancel this action,
select 'Undo all settings to midpos' by
pushing the control disc up or down
and press ENTER. 'Undo all settings
to Midposition' is displayed in the
Memory management menu in stead
off 'All settings to midposition' when
this latter is pressed.
An undo is possible as long as the
projector is playing on the same
source (= same adjustment block)
even when some adjustments as
geometry or convergence are al-
ready readjusted. When undo is
presssed all settings are reset to the
previous settings.
Item is password protected.
Highlight 'R & B convergence mid'
with the control disc and press
ENTER to set all convergence set-
tings to their midposition. A confir-
mation screen will be displayed first.
<ENTER> to confirm
<EXIT> to cancel.
Settings
in current block
will be overwritten !
!
ALL SETTINGS TO MIDPOSITION
Select with ê or é
then <ENTER>
<EXIT> to return.
Select with ê or é
then <ENTER>
<EXIT> to return.
MEMORY MANAGEMENT
COPY A BLOCK
DELETE A BLOCK
DELETE ALL BLOCKS
UNDO ALL SETTINGS TO MIDPOS
R & B CONVERGENCE MID
GR CONVERGENCE MID
MEMORY MANAGEMENT
COPY A BLOCK
DELETE A BLOCK
DELETE ALL BLOCKS
ALL SETTINGS TO MIDPOS
R & B CONVERGENCE MID
GR CONVERGENCE MID
R & B convergence mid
ENTER will set all settings to their
midposition. EXIT will cancel the op-
eration to set all settings to their
midposition.
Undo all settings to midpos
When "All settings to midpos" is se-
lected, all settings are set to their
midposition. To cancel this action,
select 'Undo all settings to midpos' by
pushing the control disc up or down
and press ENTER. 'Undo all settings
to Midposition' is displayed in the
Memory management menu in stead
off 'All settings to midposition' when
this latter is pressed.
An undo is possible as long as the
projector is playing on the same
source (= same adjustment block)
even when some adjustments as
geometry or convergence are al-
ready readjusted. When undo is
presssed all settings are reset to the
previous settings.
Item is password protected.
Highlight 'R & B convergence mid'
with the control disc and press
ENTER to set all convergence set-
tings to their midposition. A confir-
mation screen will be displayed first.
<ENTER> to confirm
<EXIT> to cancel.
Settings
in current block
will be overwritten !
!
ALL SETTINGS TO MIDPOSITION
Select with ê or é
then <ENTER>
<EXIT> to return.
Select with ê or é
then <ENTER>
<EXIT> to return.
MEMORY MANAGEMENT
COPY A BLOCK
DELETE A BLOCK
DELETE ALL BLOCKS
UNDO ALL SETTINGS TO MIDPOS
R & B CONVERGENCE MID
GR CONVERGENCE MID
MEMORY MANAGEMENT
COPY A BLOCK
DELETE A BLOCK
DELETE ALL BLOCKS
ALL SETTINGS TO MIDPOS
R & B CONVERGENCE MID
GR CONVERGENCE MID
R & B convergence mid