Barco R9002328 - Manual (Page 58)

R5975059A BARCOVISION 708 200498
GUIDED
ADJUSTMENT
MODE
GUIDED ADJUSTMENT MODE
GUIDED
ADJUSTMENT
MODE
GUIDED ADJUSTMENT MODE
R5975059A BARCOVISION 708 200498 7-5 7-5
Internal Cross Hatch Pattern
The Internal # pattern menu will
be displayed if the internal cross
hatch pattern has been se-
lected or if no source is con-
nected to the projector.
The table below lists the fac-
tory preset frequencies avail-
able.
Push the control disc up or
down to highlight the desired
cross hatch frequency and
then press ENTER.
kHz/Hz
15.6/50 PAL/SECAM
15.7/60 NTSC
31.2/50 EDTV
31.5/60 IDTV
31.2/50 HDTV EUREKA
31.5/60 HDTV ATV
33.7/60 HDTV HI-VISION
15.8/60 EGA 1
21.8/60 EGA 2
31.5/70 VGA 1,2
35.5/87 VGA 4
ENTER continues to Guided Adjustment
Mode.
EXIT returns to Setup Pattern Selection.
ENTER continues with the Picture Tuning
EXIT returns to Setup Pattern Selection or
Internal # Pattern Selection
ADJUST returns to operational mode
Note: Before continuing, in-
sure that the lenses are prop-
erly focused and that the CRT
projection angle is correctly ad-
justed. If any misalignment is
noticed, consult a qualified
service technician.
48.5/60 SUPER VGA 1
44.2/70 SUPER VGA 2
61.0/76 SUPER VGA 3
22.2/60 MAC CLASSIC
GUIDE ADJUSTMENT MODE
INSURE THAT
THE PROJECTOR HAS BEEN
INSTALLED PROPERLY
AND THAT THE LENSES/CRTS
HAVE BEEN PROPERLY
FOCUSED AND ALIGNED
ALL ADJUSTMENTS ARE
MADE WITH THE ARROW KEYS
<ENTER> to continue
<EXIT> to return
INTERNAL # PATTERN
Select with é or ê
then <ENTER> to accept
<EXIT> to return
kHz/ Hz
15.6/50 PAL/SECAM
15.7/60 NTSC
31.2/50 EDTV
31.5/60 IDTV
31.2/50 HDTV EUREKA
31.5/60 HDTV ATV
33.7/60 HDTV HI-VISION
Internal Cross Hatch Pattern
The Internal # pattern menu will
be displayed if the internal cross
hatch pattern has been se-
lected or if no source is con-
nected to the projector.
The table below lists the fac-
tory preset frequencies avail-
able.
Push the control disc up or
down to highlight the desired
cross hatch frequency and
then press ENTER.
kHz/Hz
15.6/50 PAL/SECAM
15.7/60 NTSC
31.2/50 EDTV
31.5/60 IDTV
31.2/50 HDTV EUREKA
31.5/60 HDTV ATV
33.7/60 HDTV HI-VISION
15.8/60 EGA 1
21.8/60 EGA 2
31.5/70 VGA 1,2
35.5/87 VGA 4
ENTER continues to Guided Adjustment
Mode.
EXIT returns to Setup Pattern Selection.
ENTER continues with the Picture Tuning
EXIT returns to Setup Pattern Selection or
Internal # Pattern Selection
ADJUST returns to operational mode
Note: Before continuing, in-
sure that the lenses are prop-
erly focused and that the CRT
projection angle is correctly ad-
justed. If any misalignment is
noticed, consult a qualified
service technician.
48.5/60 SUPER VGA 1
44.2/70 SUPER VGA 2
61.0/76 SUPER VGA 3
22.2/60 MAC CLASSIC
GUIDE ADJUSTMENT MODE
INSURE THAT
THE PROJECTOR HAS BEEN
INSTALLED PROPERLY
AND THAT THE LENSES/CRTS
HAVE BEEN PROPERLY
FOCUSED AND ALIGNED
ALL ADJUSTMENTS ARE
MADE WITH THE ARROW KEYS
<ENTER> to continue
<EXIT> to return
INTERNAL # PATTERN
Select with é or ê
then <ENTER> to accept
<EXIT> to return
kHz/ Hz
15.6/50 PAL/SECAM
15.7/60 NTSC
31.2/50 EDTV
31.5/60 IDTV
31.2/50 HDTV EUREKA
31.5/60 HDTV ATV
33.7/60 HDTV HI-VISION