Barco R9002328 User Manual
Page 43
CONTROLLING
CONTROLLING
CONTROLLING
CONTROLLING
R5975059A BARCOVISION 708 200498
R5975059A BARCOVISION 708 200498
5-8
5-8
When a valid source number is
selected, the projector will display
this source or it will wait on the
selected source number until the
source becomes available. A mes-
sage 'source not available' will be
displayed for a short time.
Picture controls
The picture controls can be adjusted with :
a) The RCU. The control keys are located on the left side of the key panel of the RCU
and indicated with the name of the control and an icon.
When an image control is pressed, a text box with bar scale and the function
name of the control, e.g. 'brightness...' appears on the screen (only if text is ON).
The length of the bar scale indicates the current memorized setting for this
source. The bar scale changes as the + or - buttons of the control are pressed.
b) The local keypad
All controls are hidden in the General access menu.
- Press ADJUST to display the
General access menu.
- Use the control disc to highlight
the desired analog control and
press ENTER to select.
WARNING
source not
available
$'-867
67$1'%<
(17(5
(;,7
When a valid source number is
selected, the projector will display
this source or it will wait on the
selected source number until the
source becomes available. A mes-
sage 'source not available' will be
displayed for a short time.
Picture controls
The picture controls can be adjusted with :
a) The RCU. The control keys are located on the left side of the key panel of the RCU
and indicated with the name of the control and an icon.
When an image control is pressed, a text box with bar scale and the function
name of the control, e.g. 'brightness...' appears on the screen (only if text is ON).
The length of the bar scale indicates the current memorized setting for this
source. The bar scale changes as the + or - buttons of the control are pressed.
b) The local keypad
All controls are hidden in the General access menu.
- Press ADJUST to display the
General access menu.
- Use the control disc to highlight
the desired analog control and
press ENTER to select.
WARNING
source not
available
$'-867
67$1'%<
(17(5
(;,7