Barco R9002328 - Manual (Page 52)

R5975059A BARCOVISION 708 200498
START UP OF THE ADJUSTMENT MODE
START
UP
O
F
THE
ADJUSTMENT
MODE
R5975059A BARCOVISION 708 200498
START UP OF THE ADJUSTMENT MODE
START
UP
O
F
THE
ADJUSTMENT
MODE
6-5 6-5
While in Guided or Random Access adjustment Mode, the user may use an
external source, an internally generated genlocked pattern or an internally
generated multifrequency cross hatch pattern as a setup pattern.
Warning during the start up of
the installation mode.
Some items in the Adjustment mode are password protected. While selecting
such an item, the projector asks you to enter your password. (Password
protection is only available when the password DIP switch on the controller
module is in the ON position. Contact a BARCO authorized technician when no
password is requested during the adjustment procedure and password protec-
tion is desired.)
Your password contains 4 dig-
its.
a) Adjusting the projector with
the RCU.
Enter the digits with the numeric
keys on the RCU.
Example : 2 3 1 9
For each digit entered, a 'X' ap-
pears on the screen under the
displayed text 'enter password'.
When your password is cor-
rect, you get access to the 'Ad-
justment mode'.
When the entered password is
wrong, The message 'Wrong
password !!!' will be displayed.
The projector stays on the pre-
vious selected item.
Factory programmed
password : 0000
WARNING
RISK OF ELECTRICAL SHOCK
NO USER ADJUSTABLE PARTS
INSIDE
THE FOLLOWING
INSTALLATION MENUS
ARE RESERVED TO,
AND TO BE PERFORMED ONLY
BY BARCO PERSONNEL, OR
BARCO AUTHORIZED DEALERS
IF QUALIFIED, PRESS
<ENTER> TO CONTINUE, OR
IF NOT, <EXIT> TO RETURN.
enter
password
X X X X
WRONG
PASSWORD
! ! !
While in Guided or Random Access adjustment Mode, the user may use an
external source, an internally generated genlocked pattern or an internally
generated multifrequency cross hatch pattern as a setup pattern.
Warning during the start up of
the installation mode.
Some items in the Adjustment mode are password protected. While selecting
such an item, the projector asks you to enter your password. (Password
protection is only available when the password DIP switch on the controller
module is in the ON position. Contact a BARCO authorized technician when no
password is requested during the adjustment procedure and password protec-
tion is desired.)
Your password contains 4 dig-
its.
a) Adjusting the projector with
the RCU.
Enter the digits with the numeric
keys on the RCU.
Example : 2 3 1 9
For each digit entered, a 'X' ap-
pears on the screen under the
displayed text 'enter password'.
When your password is cor-
rect, you get access to the 'Ad-
justment mode'.
When the entered password is
wrong, The message 'Wrong
password !!!' will be displayed.
The projector stays on the pre-
vious selected item.
Factory programmed
password : 0000
WARNING
RISK OF ELECTRICAL SHOCK
NO USER ADJUSTABLE PARTS
INSIDE
THE FOLLOWING
INSTALLATION MENUS
ARE RESERVED TO,
AND TO BE PERFORMED ONLY
BY BARCO PERSONNEL, OR
BARCO AUTHORIZED DEALERS
IF QUALIFIED, PRESS
<ENTER> TO CONTINUE, OR
IF NOT, <EXIT> TO RETURN.
enter
password
X X X X
WRONG
PASSWORD
! ! !