Joystick controls, Cart operation, Joystick controls -4 – Kinze Grain Carts Rev. 7/14 User Manual
Page 18: Cart operation -4
Horizontal auger OFF
Horizontal auger ON
Flow gate close
Flow gate open
Joystick top view
Joystick side view
Push Yellow trigger to open flow gate.
Pull Red trigger to close flow gate.
Press AUGER ON button to start the horizontal auger. Press
AUGER OFF button to stop horizontal auger.
PIVOT IN/OUT switch moves vertical auger +/- 10° from cart.
SPOUT IN/OUT adjusts “tippy spout” position.
Contact with rotating PTO shafts can cause death or serious injury.
Stay away from PTO shafts at all times unless clearly disconnected
from power source.
Because of load capacities on bridges and roads and because machine
is not equipped with brakes, this machine is not intended for hauling
loads on public roadways. It is the operator’s responsibility to be
aware of and follow federal, state/provincial and local regulations in
Windows provide a limited view behind cart. Use of a rear-view
mirror or optional cart mounted camera is recommended to aid the
operator in seeing behind the cart. Always check carefully, including
blind spots, before backing or turning cart.
Wide loads or loads with a high center of gravity may cause instability
or rollover when operating on hillsides or in rough terrain.
Do not transport cart with vertical auger extended this can cause
loss of control and could result in death, serious injury, or damage to
porperty and equipment.