Kinze Grain Carts Rev. 7/14 - Manual (Page 33)

TM
Grain Cart M0238-01
5/12 2-19
Operation
PRINT ACCUMULATOR
This option stores an accumulated value in a memory location called “PRTACC”. Each time a “PRINT” command is
executed, the weight value on the display is added to the “PRTACC” value.
Three print formats are available:
“PRTAC1” and “PRTAC2” print formats include:
• Scale ID
• Weight
• Weight Tag (Net, Gross, Load/Unload)
• Accumulated Weight
• Print Accumulator Tag
• Date and Time
NOTE: “PRTAC1” displays data on one line and “PRTAC2” displays data on two lines.
“PRTAC3” includes Unit of Measure and Lock-On Status in addition to features listed above and displays data on one
line.
Suggested Operation Procedures
Step 1. Press and hold “NET/GROSS” for 3 seconds.
NOTE: “SCALID” is displayed followed by current ID.
Step 2. Use left arrow (PRINT/TARE) and up arrow (NET/GROSS) keys to enter a new Scale ID.
Step 3. Press “ON” to view accumulated data.
NOTE: Press “ZERO” to clear total when accumulated weight is displayed.
Step 4. Press “ON” to resume weighing.
Step 5. Press and hold “PRINT/TARE” for 3 seconds to send data from serial port and store accumulated data.