Lenze E84AYCEC - Manual (Page 23)

EDS84AYCEC EN 3.0 - 09/2012
L
23
E84AYCEC communication manual (Ethernet POWERLINK)
Installation
Mechanical installation
5.1 Mechanical installation
The communication module can be plugged in or unplugged from the MCI slot when the
controller is switched on. When the module is plugged in, it is detected automatically, and
a function and version plausibility check is executed.
5.1.1 Mounting for standard devices of 0.25 kW and 0.37 kW
[5-1] Mounting for standard devices of 0.25 kW and 0.37 kW
Mounting steps
1. Use a screwdriver to lever out the cover of the MCI slot of the standard device and
remove it (1, 2).
2. Loosen the securing screw for the communication module at the standard device (3).
3. Insert the communication module into the MCI slot of the standard device (4).
4. Tighten the securing screw again (5).
E84YCPM002D