Lenze E84AYCEC - Manual (Page 81)

EDS84AYCEC EN 3.0 - 09/2012
L
81
E84AYCEC communication manual (Ethernet POWERLINK)
Parameter reference
Table of attributes
11.2 Table of attributes
The table of attributes contains information required for communicating with the Inverter
Drive 8400 via parameters.
How to read the table of attributes:
Column Meaning Entry
Code Parameter name Cxxxxx
Name Parameter short text (display text) Text
Index dec Index by which the parameter is addressed.
The subindex for array variables corresponds to the
Lenze subcode number.
24575 - Lenze code number Is only required for access via a bus
system.
hex 5FFF
h
- Lenze code number
Data DS Data structure E Single variable
(only one parameter element)
A Array variable
(several parameter elements)
DA Number of array elements (subcodes) Number
DT Data type BITFIELD_8 1 byte, bit coded
BITFIELD_16 2 bytes, bit coded
BITFIELD_32 4 bytes, bit coded
INTEGER_8 1 byte, with sign
INTEGER_16 2 bytes, with sign
INTEGER_32 4 bytes, with sign
UNSIGNED_8 1 byte, without sign
UNSIGNED_16 2 bytes, without sign
UNSIGNED_32 4 bytes without sign
VISIBLE_STRING ASCII string
OCTET_STRING
Factor Factor for data transmission via a bus system,
depending on the number of decimal positions
Factor 1  no decimal positions
10  1 decimal position
100  2 decimal positions
1000  3 decimal positions
Access R Read access  Reading permitted
W Write access  Writing permitted
CINH Controller inhibit (CINH) required  Writing is only possible when the controller is inhibited (CINH)