Lenze E84AYCEC - Manual (Page 30)

E84AYCEC communication manual (Ethernet POWERLINK)
Installation
Electrical installation
30
L
EDS84AYCEC EN 3.0 - 09/2012
5.2.4 Basic Ethernet Mode
The communication module can be operated in the "Basic Ethernet Mode" for a basic
parameter setting provided that the following applies:
1. Operation of the module with network address  239.
– IP address: 192.168.100.[EPL address]
– see
Node address setting
( 38)
2. No operation with real-time EPL must be carried out.
3. No integration of a managing node (EPL address  240) into the standard Ethernet
network.

Note!
Operation in the "Basic Ethernet Mode" does not permit any real-time
communication.