Installation – Lenze E82ZAFVC010 User Manual
Page 22
Installation
Electrical installation
Wiring with a host (master)
l
22
EDS82ZAFVCxxx EN 4.0
Properties of the "Thick Cable" in accordance with DeviceNet specification
General features
Structure
Two shielded balanced lines, common axis with drain wire in the centre
Total shielding
65% coverage
AWG 36 (at least 0.12 mm) of tin−coated copper braid (individually tinned)
Drain wire
At least copper 18; at least 19 cores (individually tinned)
Outer diameter
10.41 ... 12.45 mm
Concentricity
The radius deviation has to be within 15 % of half the outside diameter.
Cable sheath labelling
Name of vendor, part no., and additional labelling
Spec. DC resistance (braid, wrapping, leakage)
5.74
W/km (nom. up to 20 °C)
Certifications (U.S. and Canada)
NEC (UL), CL2/CL3 (min.)
Bend radius
20 x diameter (installation) / 7 x diameter (fixed)
Ambient temperature (operation)
−20 ... +60 °C at 8 amperes;
linear current derating to zero at 80 °C
Storage temperature
−40 ... +85 °C
Pull tension
845.5 N
max
Features of the data line
Conductor pair
At least copper 18; at least 19 cores (individually tinned)
Insulation diameter
3.81 mm (nom.)
Colours
Light blue, white
Pair windings / m
Approx. 10
Shielding/conductor pair
2000/1000, Al/Mylar, Al side on the outside, w/shorting fold (for tensile load)
Impedance
120
W +/− 10 % at 1 MHz
Capacitance between conductors
39.37 pF/m at 1 kHz (nom.)
Capacitance between one conductor and another which is
connected to the shield.
78.74 pF/m at 1 kHz (nom.)
Capacitive assymetry
3937 pF/km at 1 kHz (nom.)
Spec. DC resistance at 20 °C
22.64
W/km (max.)
Damping
0.43 dB/100 m at 125 kHz (max.)
0.82 dB/100 m at 500 kHz (max.)
1.31 dB/100 m at 1.00 MHz (max.)
Features of the voltage line
Conductor pair
At least copper 15; at least 19 cores (individually tinned)
Insulation diameter
2.49 mm (nom.)
Colours
Red / black
Pair windings / m
Approx. 10
Shielding/conductor pair
1000/1000, Al/Mylar, Al side on the outside, with w/shorting fold (for tensile load)
Spec. DC resistance at 20 °C
11.81
W/km (max.)
Properties of the "Thin Cable" in accordance with DeviceNet specification
General features
Structure
Two shielded balanced lines, common axis with drain wire in the centre
Total shielding
65% coverage
AWG 36 (at least 0.12 mm) of tin−coated copper braid (individually tinned)
Drain wire
At least copper 22; at least 19 cores (individually tinned)
Outer diameter
6.096 ... 7.112 mm
Concentricity
The radius deviation has to be within 20 % of half the outside diameter.
Cable sheath labelling
Name of vendor, part no., and additional labelling
Spec. DC resistance (braid, wrapping, leakage)
10.5
W/km (nom. at 20 °C)
Certifications (U.S. and Canada)
NEC (UL), CL2 (min.)
Bend radius
20 x diameter (installation) / 7 x diameter (fixed)
Ambient temperature (operation)
−20 ... +70 °C at 1.5 amperes;
linear current derating to zero at 80 °C
Storage temperature
−40 ... +85°C
Pull tension
289.23 N
max