Lenze E82ZAFVC010 - Manual (Page 48)

Codes 8
l
48 EDS82ZAFVCxxx EN 4.0
C1518:
I/O data length
Code Subcode
Possible settings
Data type Lenze Selection
C1518 − 4 1 [1] 12 FIX32
This code determines the number of words (I/O input data and I/O output data) being
currently exchanged with the scanner.
A change of the I/O data length must be sent to the scanner via the configuration program.
C1519:
Behaviour in idle state/in case of an error
Code Subcode
Possible settings
Data type Lenze Selection
C1519 /1 ... /3 0 0 [1] 3 FIX32
Subcode Meaning
1 Setting of the reaction in the event of idle running of the DeviceNet communication.
2 Setting of the reaction if the communication is interrupted (time out)
3 Setting of the reaction if a bus error occurs (duplicate MAC-ID, Bus−Off).
Selection Baud rate
0 No action
1 Fault (TRIP)
2 Controller inhibit
3 Quick stop
C1520:
Display of all words to scanner
Code Subcode
Possible settings
Data type Lenze Selection
C1520 /1 ... /12 g 0 [1] 65535 U16
Display of the process data input words PEW1 to PEW12 in the corresponding subcodes.
C1521:
Display of all words from scanner
Code Subcode
Possible settings
Data type Lenze Selection
C1521 /1 ... /12 g 0 [1] 65535 U16
Display of the process data output words 1 ... 12 of the scanner in the corresponding
subcodes.