Lenze E82ZAFVC010 - Manual (Page 40)

Codes 8
l
40 EDS82ZAFVCxxx EN 4.0
C1500:
Software product code
Code Subcode
Possible settings
Data type Lenze Selection
C1500 − g − VS
The code contains a strings which is 14 bytes long. The product code will be output, e.g.
82SAFV0C_XXXXX.
C1501: Software date
Code Subcode
Possible settings
Data type Lenze Selection
C1501 − g − VS
The code contains a string which is 17 bytes long. The date and time the software have
been written will be output, e.g. June 21 2000 12:31.
C1502:
Display of the software product code
Code Subcode
Possible settings
Data type Lenze Selection
C1502 1 ... 4 g − U32
Display of code C1500 in 4 subcodes with 4 digits each.
C1503:
Display of the software date
Code Subcode
Possible settings
Data type Lenze Selection
C1503 1 ... 4 g − U32
Display of code C1501 in 4 subcodes with 4 digits each.
C1509:
Setting of the node address
Code Subcode
Possible settings
Data type Lenze Selection
C1509 − 63 1 [1] 63 FIX32
Only valid if switches S7 and S8 are in the ON position.
)
Note!
Switch off and then on again the voltage supply of the function module to
activate the changed settings of the node address.
Please observe that the node addresses are not the same when using several
networked nodes.