Lenze E82ZAFVC010 - Manual (Page 33)

Commissioning
Controls and displays
Possible settings using the front switch
6
l
33 EDS82ZAFVCxxx EN 4.0
Baud rate setting
)
Note!
The baud rate must be the same for all devices and the scanner.
ON
1 6 2 7 4 3 8 5 9 10
ON
OFF
Fig. 6−3 Baud rate setting
Baud rate S7 S8
125 kbits/s OFF OFF
250 kbits/s OFF ON
500 kbits/s ON OFF
Setting of baud rate (and node address) via software
configuration.
The baud rate can be
l set manually via software or
l automatically detected.
ON ON
)
Note!
Set the baud rate with S8/S9 if the controller is compatible with the E82ZAFD
function module (S10 = ON).