3 residual hazards, Residual hazards – Lenze E82ZAFVC010 User Manual
Page 9
Safety instructions
Device− and application−specific safety instructions
l
9
EDS82ZAFVCxxx EN 4.0
2.2
Device− and application−specific safety instructions
ƒ
During operation, the function module must be firmly connected to the standard
device.
ƒ
With external voltage supply, always use a separate power supply unit, safely
separated to EN 61800−5−1 ("SELV"/"PELV"), in every control cabinet.
ƒ
Only use cables corresponding to the given specifications (
¶ 21).
,
Documentation for the standard device, control system, system/machine
All other measures prescribed in this documentation must also be
implemented. Observe the safety instructions and application notes stated in
the documentation.
2.3
Residual hazards
Protection of persons
ƒ
If the controllers are used on a phase earthed mains with a rated mains voltage
³ 400 V, protection against accidental contact is not ensured without implementing
external measures. (See chapter "4.3",
^ 16)
Device protection
ƒ
The module contains electronic components that can be damaged or destroyed by
electrostatic discharge.