Lenze 931W - Manual (Page 14)

Installation
System requirements
3

14 HB 13.0001-EN 3.0
3 Installation
3.1 System requirements
In order to be able to work with the ”fluxx” software, the following minimum
requirements with regard to hardware and software have to be met:
ƒ Microsoft Windows NT 4.0, 95/98, Windows 2000, Windows XP operating systems
ƒ IBM-compatible PC (Pentium 90 processor or higher)
ƒ 64 MB main memory (RAM) for Windows 9x/Me/NT, 128 MB for Windows XP/2000
ƒ Free slots/interfaces according to the requirements of the fieldbus interface module
to be used
ƒ Hardware connection via RS232 connection ( GHB 931 M/W)

Tip!
It is recommended to use a mouse.
In order to be able to communicate online with the target system, you connect the target
system to the PC via the respective interface/adaptor cable. Information regarding the
connection can be gathered from the Operating Instructions of your servo inverter.
3.2 Installation of the software
The ”fluxx” software does not have to be unpacked or installed. It can be copied on any
accessible memory area on your PC and can be started by selecting the following symbol.
l
fluxx.exe