Lenze 931W - Manual (Page 2)


2 HB 13.0001-EN 3.0
This Manual is valid for 931M/W servo inverters
ƒ The 931 W inverter is used for separate mounting.
ƒ The 931 M inverter is an integrated motor inverter. The motor, the electronics, the feedback, and
possibly the brake is integrated into the system.
What is new, what has changed ?
Material No. Version Description
13142788 3.0 06/2006 TD31 First edition
Important note:
Software is provided to the user ”as is”. All risks regarding the quality of the software and any results obtained from its use
remain with the user. The user should take appropriate security precautions against possible maloperation.
We do not accept any responsibility for direct or indirect damage caused, e.g. loss of profit, loss of orders or adverse
commercial effects of any kind.
All trade names listed in this documentation are trademarks of their respective owners.
© 2006 Lenze GmbH & Co KG Kleinantriebe, Hans-Lenze-Straße 1, D-32 699 Extertal
No part of this documentation may be reproduced or made accessible to third parties without written consent by Lenze GmbH &
Co KG Kleinantriebe.
All information given in this documentation has been selected carefully and complies with the hardware and software described.
Nevertheless, deviations cannot be ruled out. We do not take any responsibility or liability for damages which might possibly occur.
Necessary corrections will be included in subsequent editions.