Lenze 931W - Manual (Page 24)

Software implementation and parameter setting
Status menu
Status messages
5

24 HB 13.0001-EN 3.0
”Quick stop” field
nìáÅâ лнзй L lÑÑ
Via the ”Quick stop” button, a menu field can be opened by means of which a quick stop
or switch-off of the output stage (motor coasts) can be actuated, if required. This function
is protected by a password query. After entering the correct password, the access
authorisations of the operating program to the drive are increased to ”Online level 4”, and
a possibly connected bus system is automatically restricted with regard to its access. This
function provides a certain safety during a commissioning via bus systems. After entering
the correct password, the following dialog box opens. By means of this dialog box, a quick
stop or a normal stop (motor coasts) can be effected.
5.2.1 Status messages
Status messages are short information messages concerning the operating status of the
drive. For this, the following possibilities are provided in the ”Status” menu:
ƒ Warning:
As soon as the drive is operated beyond the specified range, a warning signal appears.
Warning signals do not yet result in a switch-off of the motor, but can notify potentially
critical operating states.
Example: motor temperature > 130
° C.
ƒ Fault:
If a fault occurs, the motor is automatically switched off.
Example: motor temperature > 140°C.
ƒ Editing data set:
This status message occurs as soon as a travel data set is edited and still is in process at the
time.
ƒ Setpoint reached:
Here a message is effected as to whether the setpoint specified in the current travel data
set has beenreachedby theactual value.The typeof thesetpoint dependsonthecontroller
type set in the ”Travel data sets” menu, e.g. ”Speed”.
ƒ Limit switch, right:
The right limit switch has been reached.
ƒ Limit switch, left:
The left limit switch has been reached.