Rockwell Automation 1404-M4_M5_M6_M8 Powermonitor 3000 User Manual, Firmware rev. 3.0 or LATER - Manual (Page 215)

Publication 1404-UM001F-EN-P - November 2009 215
Powermonitor 3000 Data Tables Appendix A
Setpoint Setup/Read-back Select and Status Parameters
CSP File No. N23
Remote I/O BT 22
CIP Assy. Inst. 24 (Write), 25 (Read)
No. of Elements 16
User Configurable No
Data Type Integer
Data Access Read / Write
PM3000 Type All
Setpoint Setup/Read-back Select and Status
Element
No. Modbus
Address Element name Range Units Default
Value Comment
0 40701 Password 0…9999 - 0 Required for configuration, -1 for readback
select, returns -1.
1 40702 Setpoint number 1…10 (M4, M5)
1…20 (M6, M8) - - Refer to Writing Setpoint Configuration by
Using Communication on page 134
.
2 40703 Read-back mode 0…1 - 0
3 40704 Setpoint type 0…52 -
0
(1)
4 40705 Evaluation condition 0…5 - 0
5 40706 High limit
Integer 0…9999 Depends
on
setpoint
type
0
(1)
6 40707 High limit Exponent -4…21
0
(1)
7 40708 Low limit
Integer
0…9999
0
(1)
8 40709 Low Limit Exponent -4…21
0
(1)
9 40710 Action delay 0…3600 (M4, M5)
0…30,000
(M6, M8) Seconds
(M4, M5)
0.1 s
(M6, M8) 0
10 40711 Release delay 0…3600 (M4, M5)
0…30,000
(M6, M8) Seconds
(M4, M5)
0.1 s
(M6, M8) 0
11 40712 Output action 0…32 (M4, M5)
0…43 (M6, M8) -
0
(1)
12 40713 Status 0…1 - 0