Rockwell Automation 1404-M4_M5_M6_M8 Powermonitor 3000 User Manual, Firmware rev. 3.0 or LATER User Manual
Page 23
Publication 1404-UM001F-EN-P - November 2009
23
Product Description Chapter 2
Native RS-485 Communication Only (catalog numbers ending in -000)
Status Indicator
Indicator Color
Indicator State and Communication
Condition
F1
Off
Not Used
F2
Off
Not Used
F3
Off
Not Used
RS-232 Optional Communication (catalog numbers ending in -232)
Status Indicator
Indicator Color
Indicator State and Communication
Condition
F1
Off
Not Used
RS-232 RX
Off
The RS-232 bus is idle; no active data is
present
Flashing Green
Power monitor is receiving data.
RS-232 TX
Off
The power monitor is not transmitting any
data onto the RS-232 bus
Flashing Green
The power monitor is transmitting data.
Remote I/O Optional Communication (catalog numbers ending in -RIO)
Status Indicator
Indicator Color
Indicator State and Communication
Condition
F1
Off
Not Used
F2
Off
Not Used
R I/O
Off
Remote I/O communication has not been
established
Flashing Green
Remote I/O communication has been
established but there are errors
Steady Green
Remote I/O communication has been
established
Powermonitor 3000
F1
F2
F3
Powermonitor 3000
F1
RX
TX
}
RS-232
Powermonitor 3000
F1
F2
R I/O